Hello Tom,
I posted a clip for you, giving things a nice test on my mill drill.Mainly testing the counter weight system i put on the z axis.But shows nice closed loop movement of steppers, using the KFLOP.
http://www.youtube.com/watch?v=jA-Hi8s1DVM

Thanks again,
Troy

:) Ya, came off a Supermax. I can balance it to where there is only about 8 pounds to lift and to pull down. But i have counter weight about 15 lbs lighter right now as this helps in damping vibration at tool, mainly because my linear rails are at max specs maybe over. :)
But i got a Box Way in plans for Z axis...some day...maybe... ;)

Thanks,
Troy

--- In DynoMotion@yahoogroups.com, Brad Murry <bradodarb@...> wrote:
>
> Nice machine Troy!
>
>
>
> Is that a knee mill head? I'm sure the counterweight is much more effective
> than the usual gas springs you see.
>
>
>
> -Brad Murry
>
>
>
> From: DynoMotion@yahoogroups.com [mailto:DynoMotion@yahoogroups.com] On
> Behalf Of tmday7
> Sent: Tuesday, February 07, 2012 9:31 AM
> To: DynoMotion@yahoogroups.com
> Subject: [DynoMotion] KFLOP and New Counter Weight test
>
>
>
>
>
> Hello Tom,
> I posted a clip for you, giving things a nice test on my mill drill.Mainly
> testing the counter weight system i put on the z axis.But shows nice closed
> loop movement of steppers, using the KFLOP.
> http://www.youtube.com/watch?v=jA-Hi8s1DVM
>
> Thanks again,
> Troy
>